ELNA 3003 - Fabrics, Threads and Needles; Placing the Thread Spool; A Dditional Spool Pin.A; Removing the Bobbin

FABRICS,
THREADS
AND
NEEDLES
PLACING
THE THREAD
SPOOL
ADDITIONAL
SPOOL
PIN
Fabics
Threads
Needles
Light Crepe de
Chine, Voile, lawn, fine
Silk 10/70
or
,7
weight
Georgette,
11/75
or
Orgondie,
Trico,
fine Cotton
or
Mesh, Percale
Synthetic
Thread
12/80
Medium
Linen, Cotton
Piqu6 Medium
Weight 12/75
or
,-
weight
Woollens,
Double Knits
Cotton or
12/80 or
Percale
Synthetic Thread
14/90
Hear/
Denin,
Tweed, Gabardine,
Sewing
Silk,
12/80 or
#
weight
Coatng,
Drapery
and
Heavier Cotton
or
14/90
Upholstery
Fabrics
Synthetic
Thread
Lift up the spool
pin as
shown. Place
the The
additional
spool pin
is used
for
For best results,
use needles
and threads
that are
adapted to
the fabrics.
For finer fabrics,
fine
matching
spool holder
on the spool
and lower
sewing with
2 needles
or to wind the
bobbin
needles and threads,
for heavier
fabrics, stronger
needles
and threads
the
spool pin
without
* The small
spool holder
is used
with narrow
unthreading
the machine.
Use
the same
thread
For needle
and bobbin
thread
spools.
Place
the felt
on the
spool pin
When
sewing stretch,
very fine
fabrics and
synthelics, use
a needle
with blue shank.
This needle
prevents skipped stitches.
REMOVING THE BOBBIN
When
sewing very fine fabrics,
reinforce the reverse side
with fusible intledining or
very fine Push the hook
cover plate button to
release
paper
that will be
torn off afler
the cover plate.
tift out the bobbin.