ELNA 3003 - Corded Buttonhole.A23; Zipper Insertion

CORDED
BUTTONHOLE
With the buttonhole
foot raised, hook
the Sew the buttonhole
according the the
instruc Pull the left
end of the piping cord
to make
cord on
the cord spur at the back of the foot tions given
on pages A-20 and A-2 I disappear the
loop at the tear
Lead the two ends
of the cord towards
you Remove
the garment from
the machine and
Cut flush the cord
ends.
R
and under
the foot, with the tails showing
in secure the threads.
front.
"
Adjust
the
stitch
width
to the
thickness
of the
Pass
the
ends
into
the
forks
at
the
front
of the
cord used.
foot and
hold them tightly.
" To open the buttonhole
and start the next Lower
the needle into the fabric at the
starling
one, refer to the
instructions on page A2 1.
point, then lower the foot.
ZIPPER
INSERTION
15-4 A
3 -6
The zipper foot E can be attached
either on Preparing
the fabric:
Baste the opening
and iron Remove the bast
the left or on the right, depending
on the way Prepare
an open searm and
sew both fabrics ing
threads.
the zipper is fixed
on the garment
together, right side
against right side to the
height
oF
the opening.