ELNA 3003 - Threading the Machine

THREADING
THE
MACHINE
itLi
__ __ __C_) 05
Raose
rhe oake p ovef
to its highest
2. Pass the thread
around the thread
3 Frmly draw
the thread from right
4. Slide the
thread to the left behind
(jc
,
position
by turnin thie ba.'je
wheel
guide and up again
in the left
to left into the
take-up lever
the thread guide
on the needle
:wards
yeo
slot.
eyelet
bar.
or
P Rise the pesser
fcot, then pass the
/3
t-I-thoed "i [le
,rdef Foret
1 to 5
Model
3003
5. Draw about 15 cm (6"1 of
-I) Pas the hread
nro he thread
thread through needle
eye.
2'- qguide and draw it down along
4-
the right s5ot
Models 3005
+ 3007:
/
5
Thread
the needle
by
using
the
needle threader
(see page A 13)