8
Controlling Sewing Speed
Speed control slider
You can limit the maximum sewing speed with the
speed control slider according to your sewing needs.
To increase sewing speed, slide it to the right.
To decrease sewing speed, slide it to the left.
Foot control
Pressing on the foot control can vary sewing speed.
The harder you press the foot control, the faster the
machine runs.
NOTES:
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully
depressed.
Keep the foot control free from accumulation of lint,
dust and loose cloth.
Do not place anything on the foot control.
Operating Instructions:
Foot controller Model 21249 is for use with sewing
machine model 5200.
Presser Foot Pressure Adjusting Lever
The presser foot pressure adjusting lever should be
set at “3” for regular sewing.
Reduce the pressure to “2” for the applique, cutwork,
draw work and basting.
Set the pressure at “1” when sewing the chiffon, lace,
organdy and other fine fabrics. Velour and knits with a
lot of stretch may also require the pressure at “1”.
q Presser foot pressure adjusting lever
q
To Next Page
Loading...
Need help?
General
