EasyManua.ls Logo

ELNA 5200 - Shell Tuck; Satin Stitches

ELNA 5200
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
qw
Shell Tuck
Machine Settings
q Pattern: #15
w Presser foot: Satin stitch foot F
e Needle thread tension: 6–8
This is a pretty hem finish for lingerie and tricot
fabrics. You can sew shell stitches in any direction
on knits or soft silky wovens.
Use a lightweight fabric. Fold and stitch on the bias.
Allow the needle to just clear the folded edge of the
fabric when it swings off the fabric to the right.
If you sew rows of shell stitches, space the rows at
least 1.5 cm (5/8˝) apart.
For better sewing results, interfacing should be used
on the wrong side of fabric on stretch or
elastic fabrics.
Press auto-lock key while sewing the last pattern, and
machine will stop automatically after the last pattern is
finished.
Satin Stitches
Machine Settings
q Pattern: #24 to #27
w Presser foot: Satin stitch foot F
e Needle thread tension: 1–4
SECTION IV. DECORATIVE STITCHES
q we
e

Table of Contents

Other manuals for ELNA 5200

Related product manuals