ELNA eXperience 620 - English; Table of Contents

2
T AB L E O F CONTENTS
SECTION I –Machine Parts and Functions
Part Names .........................................................3
Standard Accessories .......................................4
Presser Foot and Accessory Definitions... .5-6
Extension Table and Free Arm ........................6
Circular Sewing Pivot Points ...........................7
Using the Fine Adjustment Screw....................7
How to Drop the Feed Dog ...............................7
Foot Pressure Dial .............................................8
Presser Foot Lever and Additional
Presser Foot Clearance ..............................8
Attaching and Removing Presser Feet ..........8
Attaching and Removing Shank ......................9
Seam Allowance Lines .......................................9
Controlling Sewing Speed ................................9
Adjusting Needle Thread Tension.............. 10
SECTION II –Getting Ready to Sew
Connecting Machine to Power Supply ..........11
Selecting the Correct Needle and Thread ...12
Changing Needles ............................................12
Needle Definitions .............................................13
Keys and LED Readout …………………..14-16
Winding a Bobbin ………………………….17-18
Additional Spool Pin ........................................18
Inserting the Bobbin ........................................19
Threading the Machine……………………… ..20
Built-in Needle Threader …………………… ..21
Drawing Up the Bobbin Thread …………… ..22
Buttonhole Variations........................................23-24
SECTION III –Taking Care of Your Machine
Cleaning the Bobbin Area .......................... 25
Cleaning the Hook Area and Feed Dog . 25-26
Replacing the Bobbin Case....................... 26
Changing the Light Bulb ........................... 26
STITCH CHART ....................................... 27
OPTIONAL ACCESSORIES ...................... 28
TROUBLESHOOTING ............................. .29
INDEX..................................................... 30
NOTE: In formation found in this instruction
manual is current at the time ofprinting. Elna
reserves the right to change and update
specifi cations and information as needed.