Elo TouchSystems i-series 4.0 User Manual

UM600410 Rev 02 page 25 of 75
User Manual –i-series 4.0
• If the pairing requests a PIN, enter the PIN.
• Tap PAIR, to connect.
• When the Bluetooth device is successfully connected to i-series 4.0, the connection will show as Active or Connected.
Unpair a paired Bluetooth Device
• Navigate back to ‘Connected devices’ screen, from AVAILABLE MEDIA DEVICES or PREVIOUSLY CONNECTED DEVICES.
• Tap settings of the connected device (e.g. JBL Flip 3).
• In the settings menu, it is possible to DISCONNECT, FORGET (to unpair the device) and to enable and disable Phone calls, Media
audio and Contact sharing.
Cast
This allows to mirror the i-series display onto a wireless display device (e.g. Smart TV).
Note: Make sure the wireless display capable device and i-series 4.0 are on the same wireless network. See Network & Internet connection on
this user manual.
• Tap Connection preferences.
• Tap Cast.
BT Device Setting

Elo TouchSystems i-series 4.0 Specifications

General

Brand	Elo TouchSystems
Model	i-series 4.0
Category	Touchscreen
Language	English