iv. Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits.
v. Disconnect and remove any I/O cables that the digital device does not use.
(Unterminated I/O cables are a potential source of high RF emission levels.)
vi. Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs. (Removing or cutting the line cord ground may increase RF
emission levels and may also present a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician.
Agency Certifications
The following certifications and marks have been issued or declared for the IDS ET3203L/ET4303L/ET5053L monitor:
• UL, FCC (US) - Class A
• cUL, IC (Canada)
• CB (International safety)
• CE (Europe) - Class A
• RCM (Australia)
• VCCI (Japan)
• CCC (China) (for TouchPro version only)
To Next Page
Loading...
