Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB
Fig 6
7.2. Splash guard
The chamber where the dryer brush rotates is delimited by a rubber band which has the
scope to avoid water splashes but holds detergent on the brush. The rubber band, or
“bumper” is fixed on the brush plate across two steel rings. Dismantling is done by
releasing the rings on the opposite grooves in the brush plate.
05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB
To Next Page
Loading...
