Manuale istruzioni LAVASCIUGA MOD. ZLA40 – ZLA40C – ZLA40CB
Fig 25
8.3.3. Adjusting the amount of detergent soution
The machine has been given a tap that opens and closes the flow of detergent solution that is
expelled on the brush. This tap if, also partially opened, regulates the water flow to the
brush.
Use the lever towards the back of the brush plate, this lever opens ( turning anti-clockwise)
a tap that regulates the amount of water and detergent that goes on the floor.
Fig 26
Fig 27
05/07/11 Rev .0.0 Lavasciuga Mod.ZLA40 – ZLA40C – ZLA40CB
Position of the
lever that adjusts
the tap
To Next Page
Loading...
