Parameterizing with GW-GNET+ 1
gas-net F1
Page 1-7
Proceed as usual:
1. Start GW-BASE on your laptop computer.
2. Connect the DSS interface of the gas-net device to a COM interface of the
laptop using a parameterization cable.
3. Start the communication program by clicking the Import – Data interface
tool in the GW-BASE toolbar. After the data connection to the device has
been established, the type plate of the connected device appears on the
screen.
4. Select the Tools tab. The appearing tab lists all available service programs.
5. Start the desired program by double-clicking.
The functional range of the service programs is manageable and practical. The
operation is thus rather easy. A comprehensive online help is also available for
each program. It can be activated via the Help – Content menu item or by
pressing the F1 key.
To Next Page
Loading...
Need help?
General
