ELTEX ESR-21 - Page 358

ESR series service routers.ESR-Series. User manual
358
•
•
•
•
•
•
Step Description Command Keys
5 Specify route target import for the
given VRF.
esr(config-vrf)# route-target
import <RT>
<RT> – Route-target value,
specified in one of the following
forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take values
[0..255], nn may take values
[1..65535];
<4ASN>:<nn>— where
<4ASN> may take values
[1..4294967295], nn may
take values [1..65535];
6 Specify route target export for the
given VRF.
esr(config-vrf)# route-target
export <RT>
<RT> – route-target value,
specified in one of the following
forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take values
[0..255], nn may take values
[1..65535];
<4ASN>:<nn>— where
<4ASN> may take values
[1..4294967295], nn may
take values [1..65535];