ESR series service routers.ESR-Series. User manual
Step Description Command Key
5 Setting the UDP port number of the 
Firewall session reservation service 
through which information is 
exchanged when working in unicast 
mode (optional).
ip firewall failover port 
<PORT>
<PORT> – port number of Firewall 
session reservation 
service,specified in range 
[1..65535].
6 Binding of a VRRP group, based on 
which the state (main/backup) of the 
router is determined when reserving 
Firewall sessions (optional).
ip firewall failover vrrp-group 
<GRID>
<GRID> – VRRP router group ID, 
takes values of [1..32].
7 Enabling Firewall session 
reservation.
ip firewall failover
When configuring firewall failover, NAT sessions between devices will also be synchronized.