ELTEX ESR-21 - Page 617

ESR series service routers.ESR-Series. User manual
617
Step Description Command Keys
7 Create AAA DAS profile. esr(config)# aaa das-profile
<NAME>
<NAME> – DAS profile name, set by
the string of up to 31 characters.
8 Specify DAS server in DAs profile. esr(config-aaa-das-profile)#
das-server <NAME>
<NAME> – DAS server name, set by
the string of up to 31 characters.
9 Configure BRAS. esr(config)# subscriber-
control [ vrf <VRF> ]
<VRF> – VRF instance name, set by
the string of up to 31 characters,
within which the user control will
operate.
10 Select the profile of dynamic
authorization servers to which CoS
queries from PCRF will be sent.
esr(config-subscriber-
control)# aaa das-profile
<NAME>
<NAME> – DAS profile name, set by
the string of up to 31 characters.
11 Select RADIUS server profile to
obtain the user service parameters.
esr(config-subscriber-
control)# aaa services-radius-
profile
<NAME>
<NAME> – RADIUS server profile
name, set by the string of up to 31
characters.
12 Select RADIUS server profile to
obtain the user session parameters.
esr(config-subscriber-
control)# aaa sessions-radius-
profile
<NAME>
<NAME> – RADIUS server profile
name, set by the string of up to 31
characters.
13 Set router IP address that will be
used as source IP address in
transmitted RADIUS packets.
esr(config-subscriber-
control)# nas-ip-address
<ADDR>
<ADDR> – source IP address, defined
as AAA.BBB.CCC.DDD where each
part takes values of [0..255].
14 Enable session authentication by
MAC address (optional).
esr(config-subscriber-
control)# session mac-
authentication
15 Organize transparent filter-based
transmission of administrative
traffic (DHCP, DNS and etc.).
esr(config-subscriber-
control)# bypass-traffic-a с l
<NAME>
<NAME> – name of the ACL being
bound, set by the string of up to 31
characters.
16 Switch to the default service
configuration mode.
esr(config-subscriber-
control)# default-service
17 Bind the specified QoS class to the
default service.
esr(config-subscriber-default-
service)# class-map <NAME>
<NAME> – name of the class being
bound, set by the string of up to 31
characters.