ELTEX NTU-2V - Page 21

____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG Optical Network Terminals 21
WAN Service:
Optical interface:
If a device supports measurement of optical signal parameters
1
, the menu displays an additional table:
Link Status – optical link status;
Optical Signal Level – level of the received signal (1490 nm);
Transmit Optical Level – level of the transmitted signal (1310 nm);
Temperature – temperature of SFF module;
Vcc Voltage – supply voltage;
Bias Current – bias current.
In order to clear the statistics and start gathering it from the beginning, click the Reset Statistic button.
1
Optional