____________________________________________________________________________________
____________________________________________________________________________________
50 NTU-2V, NTU-RG Optical Network Terminals
– Send CMS logs to syslog (require reboot) – enables/disables CMS messages transmission to the system
log.
The following settings are available in the Remote mode:
– Server IP address – IP address of the Syslog server which stores all events;
– Server IP Port – port number of the Syslog server.
Click the Apply/Save button to accept and save the changes.
4.7.5.2 The View Submenu. System Log Display
The menu is used to configure display of router's events.
Click Close to close the log display window. Use the Refresh button to refresh the information.
4.7.6 The Update Software Submenu. Software Update
In order to update software, select the software in the Software File name field (use the Choose a File or
Browse buttons) and click Update Software.
Do not switch off or reboot the device during software update. The process may take several minutes.
The device will be automatically rebooted when the update is completed.
4.7.7 The Reboot Submenu. Device Reboot
Click the Reboot button to reboot the device. The device reboot may take several minutes.
To Next Page
Loading...
