ELTEX NTU-2V - The Passwords Submenu. Access Control Configuration (Passwords); The System Log Submenu. Display and Configuration of the System Log; The Configuration Submenu. System Log Configuration

____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG Optical Network Terminals 49
4.7.4 The Passwords Submenu. Access Control Configuration (Passwords)
The menu allows user to change the password used to access the device.
In order to change a password, enter the current password, then enter a new password and confirm it.
Click the Apply/Save button to accept and save the changes.
4.7.5 The System Log Submenu. Display and Configuration of the System Log
4.7.5.1 The Configuration Submenu. System Log Configuration
The menu is used for configuration of router's events.
– Log – enable/disable system log;
– Log Level – verbosity of the event log. Severity levels in the descending order:
– Emergency;
– Alert;
– Critical;
– Error;
– Warning;
– Notice;
– Informational;
– Debugging;
– Display Level – display level of the event log messages;
– Mode – the log's operating mode:
– Local – all events a returned to the router through the buffer;
– Remote – all events are returned to the Syslog server;
– Both – both modes are enabled;
– Flash – sends events to a USB drive;
– Linux Level Console Display Level (printk) – display level of messages in Linux console;