ELTEX NTU-2V - The SIP Advanced Setting Submenu. SIP Advanced Settings

To Next Page

To Previous Page

____________________________________________________________________________________

38 NTU-2V, NTU-RG Optical Network Terminals

— Authentication name – user name for authentication;

— Password – password for authentication;

Click the Apply/Save button to accept and save the changes.

4.4.2 The SIP Advanced Setting Submenu. SIP Advanced Settings

The menu allows VAS configuration (see Appendix B – Additional Services for a detailed description).

— SIP Account – SIP account (FXS port number);

— Call waiting – when the flag is set, notification of a new incoming call is enabled;

— Call forwarding number – the number which is used for calls redirection;

— Forward unconditionally – enables unconditional forwarding;

— Forward on "busy" – enables call forwarding on "busy";

— Forward on "no answer" – enables call forwarding on "no answer";

— MWI – enables voice mail notifications;

— Call barring – when set, allows user to bar outgoing calls;

— Call barring mode – call barring mode;

— Call barring pin – password which allows outgoing calls;

— Call barring digit map – digit map which allows/bars outgoing calls;

— Warm line – being set, enables the Warm Line service which is disabled otherwise. The service allows

automatic connection without dialling immediately after phone handset is picked (hot lone)or after a

delay (warm line);

— Warm line number – warm line number;

— Warm line timeout – a delay before warm line dialling;

— Anonymous call blocking – when set, blocks calls from the subscribers whose number was not identified;

— Anonymous calling – when set, calls are anonymously made from a port (number identifying blocker);

— DND – when sets, enables the Do Not Disturb service.

Click the Apply/Save button to accept and save the changes.

Other manuals for ELTEX NTU-2V