ELTEX NTU-2V - The Security Submenu. Security Settings

____________________________________________________________________________________
____________________________________________________________________________________
40 NTU-2V, NTU-RG Optical Network Terminals
4.5.2 The Security Submenu. Security Settings
The menu contains main parameters of data encryption in the wireless network. The client wireless
equipment can be configured either manually of automatically with the help of WPS.
WPS (Wi-Fi Protected Setup) – a standard developed by Wi-Fi Alliance to simplify setup of wireless
networks. The technology allows quick, secure, and simple setup of a wireless network without having in-depth
knowledge of Wi-Fi technology and encryption protocols. WPS automatically sets the network name and
configures data encryption to protect the network from unauthorised access. These operations should be
manually done without WPS.
In order to establish a connection, user simply needs to press the WPS button located on the side panel of
the device or use web configuration to enter PIN code.
WPS Setup
— Enable WPS – in order to enable WPS, select Enable in the drop-down list if the WI-FI network adapter
of your device supports this configuration mode;
— Add Client – client authentication method (the settings are applicable in the WPA-PSK and WPA2-PSK
modes only). Click the Add Enrollee button to start the authentication process;
— Use STA PIN – authentication using client PIN code;