ELTEX NTU-2V - The Pppoe Menu. PPP Settings; The Advanced Setup Menu. Advanced Configuration; The LAN Submenu. Configuration of Main Parameters

____________________________________________________________________________________
____________________________________________________________________________________
NTU-2V, NTU-RG Optical Network Terminals 25
4.2 The PPPoE Menu. PPP
1
Settings
Set the Enable Service flag to turn a service on.
The Internet service has 2 modes of operation:
1. IP_Routed – PPPoE sessions starts on subscriber device;
2. PPPoE_Bridged – PPPoE session starts on user PC.
Username – user name for Internet access;
Password – password for Internet access;
The Username and Password fields are not available in the PPPoE_Bridged mode. The user name and
password are entered in user PC.
Click the Apply/Save button to accept and save the changes.
4.3 The Advanced Setup Menu. Advanced Configuration
4.3.1 The LAN Submenu. Configuration of Main Parameters
The menu allows configuration of main parameters of the LAN interface.
IP address – device address in local network;
Subnet Mask – subnet mask.
1
If the menu is not presented in configuration, the parameters have already been configured by you operator.