ELTEX NTU-52V - The Dynamic DNS Submenu. Dynamic DNS Configuration

 NTU-52V/VC. User manual (user)
26
•
•
•
•
Services → DHCP (Relay)
DHCP Server IP Address – IP address of the remote DHCP server.
To save the changes, click the 'Apply Changes' button. 'Port-Based Filter'and'MAC-Based Assignment'buttons
allow configuring port-based and MAC-based filtering, respectively.
5.3.2 The 'Dynamic DNS' submenu. Dynamic DNS Configuration
Dynamic DNS(domain name system) allows information to be updated on DNS server in real time and
(optionally) automatically. It is applied for assignment of a constant domain name to a device (computer,
router, e.g.NTU-52V/VC) having a dynamic IP address. The IP address can be assigned by IPCP in PPP
connections or in DHCP.
Dynamic DNS is frequently used in local networks where clients are obtaining IP addresses through DHCP and
then are registering their names on a local DNS server.
Services → DNS → Dynamic DNS
Enable–when selected, enable DHCP server (IP addresses from the following range will be dynamically
assigned to network devices);
D-DNS Provider – select the type of D-DNS service (provider):DynDNS.org,TZO.com,No-IP.com
Custom –another provider selected by user. In this case, you need to specify the provider's name (Hostn
ame) and address (Interface).