ELTEX NTU-52V - The Routing Submenu. Routing Configuration

 NTU-52V/VC. User manual (user)
35
•
•
•
•
•
•
•
•
•
•
To view the information about bridge and its connected ports click the 'Show MACs' button.
Advance → Bridging→ Show MACs
Port – port number;
MAC Address – MAC address;
Is Local– local address;
Ageing Timer – address lifetime.
To update the information in the table, click the 'Refresh' button, to close the table, click 'Close'.
5.4.3 The 'Routing' submenu. Routing configuration
This submenu is used to configure static routing.
Advance → Routing
To add the static route check 'Enable', fill the corresponding fields and click 'Add Route'.
Enable –flag for route adding;
Destination– destination address;
Subnet Mask–subnet mask;
Next Hop–next host;
Metric–metric;
Interface– interface.
Added static routes are displayed in the 'Static Route Table'. To update the information in the table, click the
'Update' button, to delete the position from the table select it and click 'Delete Selected''.