ELTEX NTU-52V - Delivery Package

 NTU-52V/VC. User manual (user)
17
•
•
•
# Front panel element LED Status Description
orange device startup is completed, the
default configuration is set
red device is booting
flashes slowly the firmware update process is in
progress
Reboot and Reset to Factory Settings
To reboot the device, press the 'Reset' button located on its side panel. In order to reset the device to the
factory settings, press the 'Reset' button and hold it for 7-10 seconds until the indicatorglows red and all other
LEDs go out. Factory settings for IP address are:LAN- 192.168.1.1,subnet mask– 255.255.255.0.Access can
be provided from LAN 1 and LAN 2.
3.2 Delivery Package
The NTU-52V/VC standard delivery package includes:
NTU-52V/VC optical network terminal;
220V/12V power adapter;
User manual.