ELTEX NTU-52V - The Logout Submenu; The Password Submenu. Access Control Configuration (Setting Passwords)

 NTU-52V/VC. User manual (user)
43
5.6.3 The 'Logout' submenu
In this section it is possible to log out by clicking on the 'Logout' button.
Admin → Logout
5.6.4 The 'Password' submenu. Access control configuration (setting passwords)
In this section you can change a password to access the device.
Admin → Password
To change the password, you must enter the existing password in the 'Old Password' field, then the new
password in 'New Password' and confirm it with 'Confirmed Password'.
To confirm and save changes, click the'Apply changes'button. Click the'Reset'button to reset the value.