Eltron LAB+ Series - LAB+ Printer Programming; Features, Conventions, and Syntax

3
INTRODUCTION TO
LAB+ PROGRAMMING
This section contains information about the
basic programming features, command syntax
and terminology.
Features Eltron’s LAB+ Language is an ASCII based
command language used to control Eltron’s
LAB+ series printers.
The command set includes features for printing
receipts or labels with bar codes, text and sim-
ple graphics. As each command line is sent, the
printer will decode it and store it in the image
buffer. To initiate and complete the print proc-
ess, a print label command is sent. The label
will print and advance to the correct tear-off
position.
980090-001 Rev.B 19
3
INTRODUCTION TO
LAB+ PROGRAMMING
This section contains information about the
basic programming features, command syntax
and terminology.
Features Eltron’s LAB+ Language is an ASCII based
command language used to control Eltron’s
LAB+ series printers.
The command set includes features for printing
receipts or labels with bar codes, text and sim-
ple graphics. As each command line is sent, the
printer will decode it and store it in the image
buffer. To initiate and complete the print proc-
ess, a print label command is sent. The label
will print and advance to the correct tear-off
position.
980090-001 Rev.B 19