Operation
Page 28
logging has started. Once the memory card is full the blue status indicator will flash for one
second every ten seconds until the card is removed. No further data logging will take place until
the logging file has been removed from the card. The logging file will not be deleted by re-
inserting the card.
If the card is removed from the card slot whilst the unit is powered on, or if the power is switched
off whilst the card is inserted, data logging will cease immediately. when the card is re-inserted
and the power is switched on, the logging file will be appended with logging data.
Reviewing voyage data from the memory card
Reviewing the voyage data logged on the memory card requires the use of a PC with a suitable
memory card reader. PC chart- plotting application software capable of reading the AIS voyage
data will also be required and this may be included with your AIS transceiver product.
To Next Page
Loading...
