Configuring your AIS transceiver
Page 35
● WiFi network name (the SSID will be blank, any name can be
entered by user),
● IP address of the network (e.g. 192.168.0.1)
● Password - Any 8 characters or more.
● WiFi Channel - Preferably 1, 6, or 11).
● Port address (e.g. 2002)
Once the ‘Write Configuration’ button is pressed on proAIS2, the WiFi
feature will be enabled with these settings.
Figure 15 Typical mobile devices for WiFi and Bluetooth connection.
4.6.2 Location Requirements
A number of factors can affect the WiFi and Bluetooth propagation. For
optimum performance we recommend that the transceiver is installed near
the center of the boat to provide a consistent signal across all areas.
Consider testing the reception to ensure you're happy before you mount the
bracket and transceiver.
4.6.3 Distance and signal strength
The distance between WiFi and Bluetooth products should always be kept to
a minimum. Products installed close to their maximum WiFi range may
Class B AIS transceiver
Laptop
Tablet
Smartphone
To Next Page
Loading...
Need help?
General
