Please read this instruction booklet before installing
your Embertec Emberstrip® 8AV+
• The Embertec Emberstrip® 8AV+
is an electrical device. Normal
safety precautions for use of an electrical device must be observed.
• Do not immerse the Embertec Emberstrip® 8AV+
in water.
• Needles, knives or any other metal or conductive item must not be
inserted into any Embertec Emberstrip® 8AV+ outlets.
• This device does not convert voltage. It must only be used with
appliances fitted with North American configuration electrical plugs
(2-pin or 3-pin) and rated at 110 – 120 V AC.
• Ensure the Embertec Emberstrip® 8AV+
is securely plugged into the
wall socket to avoid it slipping out. Ensure cords plugged into the
Embertec Emberstrip® 8AV+
remain tangle free.
• It is recommended to regularly inspect the Embertec Emberstrip® 8AV+
for damage. The Embertec Emberstrip® 8AV+
must not be used if it
shows any signs of damage.
• This Embertec Emberstrip® 8AV+ is for indoor use only. Do not use
outdoors. Do not use this Embertec Emberstrip® 8AV+
for anything
other than its intended use. Misuse may cause injury or death.
• In normal use, this device intermittently emits a green flashing light.
People who experience photosensitive epilepsy or other forms of
photosensitivity should exercise caution when using the device.
• The socket on the side of your Embertec Emberstrip® 8AV+ (called
an RJ11 socket) is for connection of your Bluetooth® Smart Sensor
only. It is NOT for connection of a phone, LAN communication
device or any other equipment.
What you need to know
8
To Next Page
Loading...