Need help?Do you have a question about the Embisphere embiScan and is the answer not in the manual?
General| Brand | Embisphere |
|---|---|
| Model | embiScan |
| Category | Barcode Reader |
| Language | English |
Configure device lock status. Scan barcodes to lock or unlock the embiScan for parameter modification.
Set keyboard layout. Select AZERTY, QWERTY, or QWERTZ modes for PC keyboard configuration.
Enable comparison. Automatically activates when connected to socket to check tag data against barcode.
Scans a barcode to show the embiScan's current configuration on the PC screen.
Scans a barcode to reset the embiScan to its original factory settings.
Manually or automatically write EAN data into the tag's EPC memory bank.
Activate to receive writing status (OK/NOK) as an ASCII text string.
Choose the company prefix for tag read/write operations, based on GS1 declaration.
Activate or deactivate the sound alerts emitted by the embiScan.
Specify single information to read: EAN, Serial Number, EPC, TID, or User Data.
Configure to read various tag information like EPC, EAN, SN, TID, and User Data.
Define punctuation used to separate words when displaying information on the PC.
Control the display of Application Identifier Codes in the data output.
Configure the delay between consecutive scan reads (laser activations).
Modify power for reading tags in RFID single or multiple modes.
Set the GTIN length for SGTIN encoding, aligning with GS1 declarations.
Configure the maximum EPC size stored in the buffer to manage tag capacity.
To Next Page