Embisphere embiScan - Full Tag Data Reading Mode

embiScan| HOW TO CONFIGURE THE EMBISCAN ?
E m b i s p h e r e C o n f i d e n t i a l & P r o p e r t y
P a g e 10 | 18
Configuration of the sound
The following barcode let you choose to activate or not the sound of the embiScan..
FUNCTIONS
BARCODE
SOUND ACTIVATED
SOUND NOT ACTIVATED
Reading Mode
This mode give the possibility to read and return only one information:
 Barcode - EAN | only read the EAN from the scanned barcode
 Barcode - SERIAL NUMBER
(1)
| Allow to only read the serial number from the nearest tag.
 Tag - BANK EPC | only read the EPC information from the tag.
 Tag - BANK TID
(1)
| Allow to only read the TID from the nearest tag.
 Tag - BANK DATA USER
(1) (2)
| Allow to only read the user memory area from the nearest tag
(1)
WARNING - This function can only be used in RFID SINGLE MODE
(2)
WARNING – when you read one tag without DATA USER, a reset of the embiScan is automatically
done !
BARCODE MODE
BARCODE
EAN
SERIAL NUMBER
(1)