Embisphere embiScan - RFID Tag Data Encryption; RFID Write Status Monitoring

embiScan| HOW TO CONFIGURE THE EMBISCAN ?
E m b i s p h e r e C o n f i d e n t i a l & P r o p e r t y
P a g e 8 | 18
Tag Encryption
The embiScan product can read the barcode data and write it (EAN data) in the tag memory (EPC bank).
For that, there is two way of use the embiScan :
 « Manual » encryption of the tag | in this mode, you must first scan the barcode and then, push the
« RFID single read » button to write the EAN in the EPC bank of the tag.
 « Automatic » encryption of the tag | in this mode, you only need to scan a barcode and the
embiScan will write it automatically the EAN read in the nearest tag
FUNCTIONS
BARCODE
MANUAL
ENCRYPTION OF THE TAG
AUTOMATIC
ENCRYPTION OF THE TAG
Writing status
If you activate this option, the embiScan will return the status of writing (OK/NOK) by a ASCII text string.
FUNCTIONS
BARCODE
ACTIVATE
THE STATUS OF ENCRYPTION
DESACTIVATE
THE STATUS OF ENCRYPTION