embiScan| HOW TO CONFIGURE THE EMBISCAN ?
E m b i s p h e r e C o n f i d e n t i a l & P r o p e r t y
4 O t h e r s c o n f i g u r a t i o n
The embiScan default value is « Locked ». It’s means that some parameter can’t be modified. For that, you
need to unlocked the embiScan.
To easily locate this parameter, the locked functions are framed in red ; the unlocked functions are in blue :
Locked functions = parameter which required to
unlock the embiScan for any modification.
Unlocked functions = parameter which can be
scanned without unlocking the embiScan
Locking / unlocking
Scan following Barcode to lock or unlock the embiScan.
Configuration of the keyboard
Following barcodes allow to configure the PC keyboard in AZERTY, QWERTY or QWERTZ mode.
To Next Page
Loading...