embrace nest - WarmPak Temperature Indicator States; Understanding OK and Too Cold States; Too Hot State and Safety Warnings

Embrace™ Nest Operation Manual (0602-50001-002) Page 16
3.4 WARMPAK™ TEMPERATURE INDICATOR
The WarmPak™ contains a WarmPak™ temperature indicator at the bottom left hand corner. The
function of the WarmPak™ temperature indicator is to alert the user to the feasibility of use of the
WarmPak™.
WarmPak™ temperature indicator design features
The temperature indicator has been positioned such that it will be visible to the user ONLY when the
WarmPak™ is correctly inserted into the BabyWrap™, as seen below.
The WarmPak™ temperature indicator alerts the user to potentially hazardous situations, if the user
has over-heated the WarmPak™. The indicator also serves to indicate to the user when the
WarmPak™ is at the right temperature and may be used, and when it has run out of stored heat, and
needs to be reheated.
WarmPak™ temperature indicator user interface
The WarmPak™ temperature indicator will display one of three states: