Install DAE railsInstall DAE rails
1.1. Insert the adjusInsert the adjustable rtable rail slide and ail slide and seat both alignseat both alignment pins ment pins into the reinto the rear channar channel of yel of yourour
cabinet.cabinet.
2.2. ExtenExtend the raid the rail and aligl and align the fron the front of the rnt of the rails as sails as shown inhown in Fig
Figururee 1717..
3.3. Insert two rInsert two retention scretention screws in the ews in the middle two middle two holes of the holes of the front and front and two retentwo retention screws tion screws in thein the
back of each rail (3U rails) as back of each rail (3U rails) as shown inshown in Fig
Figururee 1717. For 2U rails, insert one screw in the lowest. For 2U rails, insert one screw in the lowest
hole of the front and two in the back of each rail as shown inhole of the front and two in the back of each rail as shown in Fig
Figururee 18 o18 on pan pagege 2929..
To Next Page
Loading...
Need help?
General
