DIGITAL CONDUCTIVITY METER
The information contained in the accompanying document is proprietary and confidential, and may not be
copied in any manner whatsoever without prior written consent of Emcee Electronics, Inc. The document
and the material therein may not be used for any purpose other than that intended by Emcee Electronics,
Inc.
COPYRIGHT 1984 EMCEE ELECTRONICS, INC.
REVISION DATE: JANUARY 10, 2019
Page 14 of 20
11.4 * Aluminum Enclosure * Check
polyurethane coating every 2 months.
Scratched or chipped polyurethane coating may
impair intrinsic safety.
* Boîtier en aluminium * Vérifiez le
revêtement polyuréthane tous les 2 mois. Le
revêtement en polyuréthane rayé ou ébréché
peut nuire à la sécurité intrinsèque.
11.5 Do not replace batteries when an
explosive atmosphere is present.
Ne remplacez pas les piles lorsqu'une
atmosphère explosive est présente.
To Next Page
Loading...