ENGLISH MANUAL (model 4)
14
5.3 Blocking incomming calls & messages
We advise to put your smartphone or tablet in flight mode, to avoid being disturbed during a session.
Flight mode will prevent incoming calls or notifications during a session.
Don’t forget to switch Bluetooth on again.
5.4 Using multiple EMDR Kits in one location
There are a number of things to keep in mind when using multiple EMDR Kits in one location.
1. Ensure the parts are disconnected or that the app is exited properly at the end of a session or at
the end of the day. This ensures that the colleague who wants to use the EMDR Kit after you can
connect his/her tablet to it.
2. Always reset the existing connections when you start work with a different EMDR Kit or when
you change your location. To do this, use the options in the connection menu (for connecting, see
Chapter 3). This ensures that the correct parts are connected to the correct EMDR Kit.
3. If the EMDR Kit is set up correctly for connecting, always select the three parts with the strong-
est Bluetooth signal. This prevents connecting to a Light Tube or Pulsator from another EMDR Kit.
4. With multiple EMDR Kits, it is recommended to keep one tablet for each kit.
5. Each part has a unique code. In the connection menu, you can see the unique codes for each
part. You could write these down so you know which parts to connect. Such a code might look
like this: E0:0A:47:82:79:EE.
5.5 Usage advise
• This product is designed for trained EMDR therapists and should only be used by EMDR thera-
pists. The EMDR Kit is not designed to be used as a self-help tool.
• Keep the EMDR Kit out of reach from children, except of course if it is used by an EMDR therapist
that is using it to treat a child.
• Do not pick the EMDR Kit up at the Light Tube but instead grab it at the neck.
• If you want to transport the EMDR Kit, use the EMDR Kit bag that you can order on our website.
5.6 Power information
• Only use the adapters that were provided and do not manipulate/modify the adapters in any way.
• EMDR Kit Light Tube power: 12V 4.8 watt 0.4A
Light tube adapter:
Input: 100-220V 50/60Hz 0.3A
Ouput: 12V 0.6A
Headphone adapter:
Input: 100-240V 50/60Hz 0.15A
Output 5V 1.0A
To Next Page
Loading...