3.4 Configure the Gateway
To complete initial configuration for the Gateway:
Procedure
1. Access the default web page for the Gateway at https://
192.168.1.10.
a) In the User name field, enter admin.
b) In the Password field, enter default.
Figure 3-5: Gateway Log In Screen
2. Navigate to System Settings → Gateway → → Ethernet
Communication to enter the Network Settings.
a) Configure a static IP Address or set for DHCP and enter a
Hostname.
b) Restart application at System Settings → Gateway →
Backup And Restore → Restart App.
3. Disconnect the power and Ethernet from the Gateway.
September 2020 Quick Start Guide
Quick Start Guide 11
To Next Page
Loading...
