Emerson 1F95-1280 - Page 12

PROGRAMMING
Cooling
Program
Day (occupied) Night (unoccupied)
Fan Fan
MON
6:00 AM 75°F Auto 10:00 PM 78°F Auto
TUE
WED
THU
FRI
SAT
6:00 AM 75°F Auto 10:00 PM 78°F Auto
SUN
6:00 AM 75°F Auto 10:00 PM 78°F Auto
Worksheet for Re-Programming 5+1+1 and 7 Day Program
Heating
Program
Day (occupied) Night (unoccupied)
Fan Fan
MON
6:00 AM 70°F Auto 10:00 PM 62°F Auto
TUE
WED
THU
FRI
SAT
6:00 AM 70°F Auto 10:00 PM 62°F Auto
SUN
6:00 AM 70°F Auto 10:00 PM 62°F Auto
Planning Your Program – Important
The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.
The 1F95-1280 comes configured for 7 day programming and can also be configured for 5+1+1 programming (see configura-
tion section).
Factory settings are listed on Monday, Saturday and Sunday. If you are re-programming a 5+1+1 day schedule, pencil in your
own times and temperatures directly below the factory times and temperatures.
If you are re-programming a 7 day schedule, fill in all lines with the times and temperatures you want.
Keep the following guidelines in mind when planning your program.
• InHeating,lowertemperatureswillsaveenergy.
• InCooling,highertemperatureswillsaveenergy.
• IfyouplanonusingAutoChangeover,donotprogramtheheatingtemperaturehigherthanthecoolingtemperature.
12