Emerson ASTOR - Page 20

20
ETL Model No.: CF235
6. Final Assembly (Continued)
6.5
Place the Shade into the opening in the Lower Housing,
aligning the Three Flat Areas on the top edge of the
Shade with the Lower Housing Three Raised Dimples
and turn the Shade Clockwise until it stops (Figure 31).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
LOWER HOUSING
RAISED DIMPLES (3)
FLAT AREAS (3)
SHADE
CLOCKWISE
REVERSE SWITCH
Figure 31