1. Unpacking Instructions
3
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF235
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
WARNING
!
1.1
Open Carton containing the Fan. Remove top half of
styrofoam unit. Remove Parts and check to see that
you have received the following Hardware and Parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
NOTE: Place the parts from the loose parts bags in
a small container to keep them from being lost. If
any parts are missing, contact your local retailer or
catalog outlet for replacement before proceeding.
E
D
F
G
H
I
J
K
C
B
A
PACKAGE CONTENTS
1.2
Remove the Fan Motor Assembly from the protective
plastic bag. Place the Fan Motor Assembly onto the
upper foam pad with the Bottom of the Fan Motor
Assembly facing up for blade assembly.
The upper foam pad serves as a holder for the Fan
during the first stages of assembly.
HARDWARE CONTENTS
Part Description Quantity
1 Wire Connectors, 12 ga. 5
2 Clevis Pin 1
3 Hairpin Clip 1
4 Threaded Stud, #8-32 x 1-1/4” 2
5 Lockwashers, External Tooth #8 2
6 Knurled Knobs, #8-32 2
7 #6-32 x 1/4” Pan Head Screws with
Lockwashers 4
8 #8-32 x 11mm Washer Head Screws 16
9 #6-32 x 3/8” Pan Head Screw with Lockwasher
(spare) 1
10 Blade Balance Kit 1
Part Description Quantity
A Fan Motor Assembly 1
B Ceiling Cover 1
C Coupler Cover 1
D Lower Housing 1
E LED Light Fixture Assembly 1
F Shade 1
G Hanger Bracket 1
H Hanger Ball / 4.5” Downrod Assembly 1
I Receiver and Hardware 1
J Remote Control Transmitter, SR401
with Wall Bracket and Hardware 1
K Fan Blades 5
To Next Page
Loading...
Need help?
General