Installation, Operation and Maintenance Manual
DOC.IOM.RG.US Rev. 11
November 2021
31
Section 15: Drawings and Schematics
Drawings and Schematics
Figure 12 Flow control assembly - 1/2 NPTF
Controlled
ow inlet
Free ow
inlet
Table 16. Flow Control Assembly - 1/2 NPTF Parts List
Item Description Material Qty.
1 Flow Control Body AL 6061 Hard Anodized 1
2 Flow Control Cap AL 6061 Hard Anodized 1
3 Flow Control Stem SS 303 1
4 Flow Control Poppet SS 303 1
5 Spring SS 302 1
6 Hex Nut, 1/4-20 UNC, LH Thread SS 304 1
7 Knob Phenolic 1
8 O-Ring Buna N 1
9 O-Ring Buna N 1
To Next Page
Loading...
