Emerson BETTIS E796 2000 M2CP - 5.2 Quarter-Turn Model P, Q, R & M

Installation and Maintenance
Part Number: E2K-402-0313, Rev. A
Mar 2013
15
Section 5: Multi-Turn Actuators
Multi-Turn Actuators
5.2 Quarter-Turn Model P, Q, R & M
Top-mount P, Q and R and several models of M/MG’s side-mount do not require MDPI gear
reduction assembly for 1-turn Pot. If multi-turn Pot is required, BETTIS JOB SPEC SHEET
will list 84131-0000 or the correct assembly. Spec Sheet will list,(1) Pot clutch gear, (2) Pot
input gear and (3) potentiometer.
Figure 12