Emerson Bettis EHO - Section 6: Pushbutton Module (PBM)

Installation and Operation Manual
Part Number: VA001-507-32, Rev. 1
August 2016
39
Section 6: Pushbutton Module (PBM)
Pushbutton Module (PBM)
Section 6: Pushbutton Module (PBM)
The Pushbutton Module consists of the following as shown in Figure 18:
• Two Pilot Lights: OPEN and CLOSE
• Three Pushbuttons: OPEN, CLOSE AND STOP
• Local – OFF – Remote Selector Knob
Figure 25 Pushbutton Module (PBM)
The Pushbutton Module is the interface used to setup and operate the actuator and
display valve position.
To use the Local Control and Selector Knob, refer to the following tables.