Emerson El-O-Matic E Series - DSA Two-Way Stroke Limit Adjustment

Mean Repair Time
Section 11: Mean Repair Time
For sizes E12 to size E600 the MRT of the device is 1 hour.
For sizes E950 E1600, P2500 and P4000 the MRT of the device is 2 hours.
NOTICE
The MRT is estimated considering availability of skilled personnel for maintenance, spare
parts and adequate tools and materials on site (that is, it encompasses the effective time to
repair and the time before the component is put back into operation).
Procedures to repair or replace the EL-O-Matic E and P Series actuators are provided in the
respective Installation, Operation and Maintenance manual. Please refer to the Installation,
Operation and Maintenance manual for any tools required for repair and replacement and
required competency of technicians. Maintenance and subsequent test procedures are
also covered in the Installation, Operation and Maintenance manual. Any failures, identied
by the end-user during maintenance, repair or proof testing, that potentially impact the
functional safety of the EL-O-Matic E and P Series actuators should be reported back to
Valve Automation Customer Service Coordinator.
13
April 2017
SIL Safety Manual
DOC.SILM.EEP.EN Rev. 0
Section 11: Mean Repair Time