Emerson El-O-Matic ELQ Series - Mounting the ELQ Unit on a Valve; Direct Mounting Procedure; Bracket Mounting Procedure

TM
8
Installation Operation & Maintenance manual ELQ
DOC.55.EDN Rev: E
October 2012
ok!
ok!
3 MOUNTING THE ELQ UNIT ON A VALVE
Removehandlenut,handle,lockwasher,etc.from
valveifrequired.Checkpositionofvalve.
TherearetwopossibilitiesformountingtheELQunit:
• Directmounting.
• Bracketmounting.
3.0.2 Bracket mounting
• Mountbracketandadaptoronvalve.
• Placeinsertinbottomangeatactuator.
3.0.1 Direct mounting
• Placeinsertinbottomangeofactuator.
3.0.3 Normal valve rotation
 Valvesaremanufacturedsothattheyoper-
ateinonlyone90degreesegment.The
actuatorshouldbemountedforcounterclock-
wiserotationtoopenandclockwisetoclose
thevalve.