Preface 1
EV2000 Series Universal Variable Speed Drive User Manual
Preface
Thank you for using EV2000 series Variable Speed
Drive made by Emerson Network Power Co., Ltd..
EV2000 satisfies the high performance requirements by
using a unique control method to achieve high torque,
high accuracy and wide speed-adjusting range. Its
anti-tripping function and capabilities of adapting to
severe power network, temperature, humidity and dusty
environment exceed those of similar product made by
other companies, which improves the product’s reliability
noticeably;
EV2000 has integrated the general requirements,
customized requirements and industrial requirements
perfectly. It is a innovative product with practical PI,
simple PLC, flexible input and output terminals, pulse
signal input, saving parameters at stop or power outage,
master/slave reference control, traverse operation, fixed
length control. It provides OEM customers with high
integrated, reliable, cost-effective solution;
EV2000 can satisfy the customers’ requirements on low
noise and EMI by using optimized PWM technology and
EMC design.
This manual provides information on installation, wiring,
parameter setting, trouble-shooting, and daily
maintenance. To ensure the correct installation and
operation of the drive, please read this manual carefully
before starting the drive and keep it in a safe place.
Unpacking Inspection
Upon unpacking, please check for:
Any damage occurred during transportation;
Check whether the rated values on the nameplate of the
drive are in accordance with your order.
Our product is manufactured and packed at factory with
great care. If there is any error, please contact us or
distributors.
The user manual is subject to change without notifying
the customers due to the continuous process of product
improvements.
Model designation rules
EV2000 -4 T 0055 G / 0075 P
Drive series
Input volt Code
3-phase
T
Volt
Code
220V 2
380V 4
Code
Drive type
G
Fixed torque
P
Fan & pump
Code
Motor power
kW
0055 5.5
0075 7.5
0110 11
0150 15
0185 18.5
0220 22
0300 30
0370 37
0450 45
0550 55
0750 75
0900 90
1100 110
1320 132
1600 160
2000 200
2200 220
2800 280
Fig. A-1 Explanations of Drive Models
The nameplate is located on the right hand side of the
heatsink. The contents are shown in Fig.A-2. A barcode
on the plastic cover also contains the information of the
drive, as shown in Fig.A-3.
EV2000-4T0055G/0075P
5.5kW/7.5kW
3PH AC 380V-440V 15.5/20.5A 50Hz/60Hz
8.5/11KVA 13/17A 0-650Hz 0-440V
MODEL：
POWER
：
INPUT
：
OUTPUT
：
S/N：
Emerson Network Power Co., Ltd.
model
motor power
barcode
Fig. A-2 Nameplate Description
Barcode
Nameplate
Fig. A-3 Locations of Nameplate and Barcode
To Next Page
Loading...
