Emerson FB1100 - Special Instructions for Class I Division 2 Locations; Non-incendive and Unrated Field Circuits; Communication Port Wiring; RTD Connection

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide
D301820X012
November 2020
2
The basic methods for replacing termination boards or for replacing termination blocks are the
same. The only differences occur in the number of connectors on a terminal block used on a
termination board.
Restriction
Hazardous area approvals require that any part replaced in the field be the exact same part (“like-
for-like”). Upgrading or substituting different parts violates hazardous area certification.
Refer to the table below for the correct field replacement kit part number.
Item
Field Replacement Kit
Part Number
Termination Board (used with 6-connector pluggable terminal
blocks)
399185-01-1
Termination Board (used with 8-connector pluggable terminal
blocks on any FB1200 Flow Computer which has a 6-channel
expansion I/O board)
400216010-KIT