Emerson Fisher 4200 Series - Page 28

4200 Series Transmitters
Instruction Manual
Form 5596
July 2005
28
49A7891-K / IL
APPLY LUBRICANT OR SEALANT
Figure 14. Housing Assembly for Type 4211 or 4221 Transmitter without Position Switches
Key Description Part Number
Mounting Parts for Sliding Stem
Actuators
Parts for Mounting the Transmitter on
Type 470 and 471 (585C size 60 thru 130)
Actuator (figure 15)
21 Mounting plate, steel
Size 130 37A7900X012
All other sizes 37A5448X012
22 Yoke Spacer, steel (2 req’d)
Size 30, 45 only 1F9067X0012
23 Cap Screw, zn pl steel (2 req’d)
Size 30, 45 1A352624052
Size 40, 46 thru 130 1A381624052
24 Washer, pl steel (2 req’d) 1B865928982
25 Operating Arm, pl steel 19A3811X012
26 Cap Screw, pl steel 1H3284X0012
27 Square Nut, pl steel 16A6711X022
29 Torsional Spring, zn pl steel 19A3812X012
30 Lever Assembly
Size 30 thru 130
w/ 54 mm (2.125 inch) max travel 16A6705X012
Size 80 thru 130 w/ 54 thru 105 mm
(2.125 thru 4.125 inch) max travel 16A6706X012
31 Shoulder Screw, stainless steel 10B5722X012
32 Cap Screw, pl steel (2 req’d) 1C631224052
33 Stem Bracket, zn pl steel
Size 30 thru 130
with 54 mm (2.125 inch) max travel l6A6709X012
Size 80 thru 130 w/ 54 thru 105 mm
(2.125 thru 4.125 inch) max travel 16A8277X012
Key Description Part Number
34 Stem Mounting Bracket, zn pl steel
Size 30, 40, 45, 63, 64 16A0430X012
Size 46, 60, 68, 80, 86, 130 27A5447X012
Size 100 21B5965X012
35 Cap Screw, zn pl steel (2 req’d)
Size 30, 45 1A352524052
Size 40 1A553424052
Size 64 1A375124052
Size 68, 80 10A5001X012
Size 100 1U625631192
36 Sleeve, acetal 16A0428X012
37 Cap Screw, steel (2 req’d) 16A0429X012
38 Stem Washer (2 req’d)
Size 30 thru 46, pl steel 1B865928982
Size 60 thru 64, zn pl steel 1H723125072
Size 68 thru 130, zn pl steel 1K899525072
39 Stem Spacer (2 req’d)
Size 30, 45, steel 1F9067X0012
Size 40, steel 1J830724092
Size 64, steel 1J830724092
Size 68, 80, zn pl steel 16A1367X012
Size 100, steel 1V683324092
48 Lubricant (not furnished with transmitter)
49 Threadlock − medium strength (not furnished with transmitter)
51 Threadlock − mild strength (not furnished with mounting)
Parts for Mounting the Transmitter on
Type 470-7 and 471-7 (585C, size 60 thru
130) Actuator (figure 15)
21 Mounting plate, steel 37A5448X012
23 Cap Screw, zn pl steel (2 req’d) 1A381624052
24 Washer, pl steel (2 req’d) 1B865928982
25 Operating Arm, pl steel 19A3811X012