Emerson Fisher 4200 Series - Parts List

4200 Series Transmitters
Instruction Manual
Form 5596
July 2005
27
49A7893-L / IL
APPLY LUBRICANT OR SEALANT
NOTES:
ON 4212, 4222, USE KEY 35 INSTEAD OF KEY 19 AT THE “−”FEEDTHROUGH POSITION,
OMIT KEY 10
1
1
1
Figure 13. Housing Assembly for Type 4210, 4215, or 4220 Transmitter with Position Switches
and for Type 4212 or 4222 Position Switches without Transmitter
Parts List
Transmitter Common Parts
(Figures 13 and 14)
Key Description Part Number
1 Housing, aluminum 49A5654X012
2 Cap, aluminum (2 req’d) 38A5251X012
3* Pot/bushing Assembly
Type 4210, 4211 27B6208X012
Type 4212 27B6208X042
Type 4215 27B6208X022
Type 4220, 4221 27B6208X032
Type 4222 27B6208X052
4 Wire Assembly (not Type 4211, 4221) 29A7257X012
6 Machine Screw, SST
Type 4211, 4221 (3 req’d) 18A5263X012
Type 4210, 4212, 4215, 4220, 4222 (6 req’d) 18A5263X012
7 Split Washer, (Type 4211, 4221 only),
stainless steel (2 req’d) 61000580X12
8 Spacer, plastic
Type 4211, 4221 (3 req’d) 18A5265X012
Type 4210, 4212, 4215, 4220, 4222 (6 req’d) 18A5265X012
9 Wire (red), 18 AWG
50.8 mm (2 inches) Type 4211, 4221 17B0682X012
146 mm (5.75 inches) Type 4210, 4220,
4215, 4212, and 4222, 17B0682X032
10 Wire (black), 18 AWG (Not used on 4212, 4222)
50.8 mm (2 inches) Type 4211, 4221 17B0682X022
146 mm (5.75 inches) Type 4210,
4220, 4215, 17B0682X042
11 Barrier Strip (Type 4211, 4221 only), plastic 1H290406992
Key Description Part Number
12 Machine Screw (Type 4211, 4221 only),
stainless steel (2 req’d) 1B9925X0012
13 Barrier Marker Strip (Type 4211, 4221 only) 15A4793X012
14* O-Ring, nitrile (2 req’d) T1205106562
15* O-Ring Bushing, Nitrile 10A8931X012
16 Solder Lug, (Type 4211, 4221 only)
Tin pl brass (2 req’d) 15A6903X012
17 Insulating Washer, PTFE (2 req’d) (not shown) 14A7983X012
18 Self Tapping Screw, pl steel (2 req’d) 1P426928982
19 RFI Filter
Type 4212, 4222 (1 req’d) 11A7793X012
4210, 4211, 4215, 4220, 4221 (2 req’d) 11A7793X012
20 Pipe Plug (Type 4211, 4221 only), steel 0Z020128992
35 Machine Screw, pl steel (Type 4212, 4222 only) 17A3109X012
43 Field Circuit Printed Wiring Board Assembly 39A6195X012
45 Transmitter Printed Wiring Board Assembly
Type 4210, 4220 39A6156X022
Type 4211, 4221 39A7236X012
Type 4212, 4222 39A6156X032
Type 4215 39A6156X012
48 Lubricant (not furnished with transmitter)
49 Threadlock − medium strength (not furnished with transmitter)
50 Anti-seize (not furnished with transmitter)
55 Pipe Plug (not shown), pl steel 1A3619X0012
56 Machine Screw (not shown), pl steel
Type 4212, 4222 only 17A3109X012
58 Wire Retainer, pl steel, (2 req’d) 16A2821X012
65 Nameplate − − −
67 2-Wire Connector 19A3898X012
*Recommended spare parts