Emerson Fisher Multiport Flow Selector User Manual

Instruction Manual
D104239X012
Multiport Flow Selector
January 2019
15
Parts List
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Note
Contact your Emerson sales office
for part ordering information.
Multiport Assembly
(see figure 2 and 3)
Key Description
1 Valve Body
2 Plug
3 Bearing
4 Rod Seal
5 O-Ring, upper plug
6 Back up Ring, upper plug
7 O-Ring, lower plug
8 Back up Ring, lower plug
9 Plug Bushing
10 Scraper
11 Wave Spring Scraper
12 Seal Insert
13 Seal Carrier
14 O-Ring
15 Back up Ring
16 Back up Plate
17 Wave Spring
18 Seal Adjuster
19 Bonnet
20 O-Ring
21 Back up Ring
22 Wiper Retainer
23 Cap Screw, Wiper Retainer
24 Wiper Seal
Key Description
25 O-Ring, Wiper Retainer
26 O-Ring, Shaft
27 Pipe Plug
28 Lube Fitting
29 Pipe Bushing
30 Set Screw
31 Stud
32 Nut
33 Lifting Lug
38 White Petrolatum
39 High temperature silicone grease
40 Anti-seize lubricant
41 Grease
42 Thread sealant paste
43 Mounting Bracket
44 Cap Screw
45 Cap Screw
46 Lock Washer
47 Coupler
48 Key
49 Travel Indicator Holder
50 Travel Indicator Pointer
51 Jam Nut
52 Nut
53 Travel Indicator Plate
54 Travel Indicator Stud
55 Cap Screw
56 Lock Washer
57 Washer

Emerson Fisher Multiport Flow Selector Specifications

General

Brand	Emerson
Model	Fisher Multiport Flow Selector
Category	Control Unit
Language	English